Tubing /casing spiders are tools for handling drill collars, casings, tubings and slick pipes. Both the spider body and slips are made of high-quality alloy steel and heat-treated especially. The spiders are not so weighty and easy to operate. They are designed and manufactured according to API Spec 7K specification for drilling and well servicing equipment. The API spider same API Split master bushing with a diameter of 4in/ft on the diameter taper. The spider is made of high-quality alloy steel and heat-treated especially. The Spider is easy to operate.

• TS tubing spider Interchangeable slip body inside the spider
• API spider is made of alloy steel according to API standard
• NDT test with the national best standard
• Quality assured, warranty 6 months after sale, spare parts are traceable to provide

Air-operated elevators are conventional elevators to which power actuation has been added. This feature permits remote opening and closing of the elevators. It can meet normal working requirements in oil drilling & workover and also reduce workload. The products shall be designed and manufactured according to API SPEC 8A/8C Specifications for drilling and production hoisting equipment.The products shall be designed and manufactured according to API SPEC 8A/8C Specifications for drilling and production hoisting equipment.

• Air-driven type elevator, easy to operation
• Load capacity from 150-200ton
• API certified product with full NDT test.
• Drilling site service available

The Pneumatic spider is mainly utilized in the petrochemical industry to lock and hold drill pipes and oil pipes for well pulling the petrol oil and natural gas wells. The products are designed and manufactured in accordance with API Spec 7K. All spiders can be either manually, pneumatically, or hydraulically operated to effectively mitigate labor intensity and increase work efficiency. With optimal construction, the pneumatic spider is operated in an easy, safe, and reliable manner, and is believed to be an ideal tool for well pulling. To correctly understand the features and functions of the pneumatic spider, please read the operation instruction manual carefully before using the product.

• API 7K standard with national best quality
• 100% NDT test for product
• Pneumatic operation with capacity from 80 to 175ton
• Warranty as 12 months after sale

Casing bushing is combined by bushing body and insert bowls. It is suitable for handling casing less than 30 in. There are two types: solid and split. CU and CUL are solid bushings, and CB is split bushing. These series of rotary bushings are suitable for API standard rotary slips, drill collar slips, casing slips, insert bowls, and roller bushings, with two structures: solid body and split body. Two drive types are available: pin-driven and square drove. It is designed and manufactured according to API Spec 7K “Specification for Drilling Equipment”.

2 3/8-8 5/8	Bushing3103 + Insert Bowl 3105+1809
9 5/8-10 3/4	Bushing3103 + Insert Bowl 3105+1902
11 3/4-13 3/8	Bushing3103 + Insert Bowl 3105

KHT and TQ series casing power tongs are used for making up or breaking out casings. Tong head is designed as open and is fitted with two jaws which can ensure reliable gripping. Air type clutch is utilized as a gear shifting mechanism, so it is possible to change gear under running. TQ series of casing tongs can be configured with torque device to perform computer monitoring and managing on pressure, torque and rounds. The casing tong has been granted with National Invention Patent.

• TQ-series casing tongisa able to making-up or breaking-out casing string from diameters 4” to 13 3/8” while drilling
• high-efficiency, safety, reliability, labor-saving, and connection qualityguaranteed.
• Hydraulic powereddrive
• Reliable operation performance
• Designed and manufactured according to API Spec 7K
• Short on deliver time, spare parts available after sales

It is designed and manufactured according to API Spec 7K Specification for drilling and well-servicing equipment.The Hinged Casing Spider has a hinged spider body with a split insert bowl. It is put above the rotary table and is suitable for most casings of different sizes. It is designed and manufactured according to API Spec 7K Specification for drilling and well-servicing equipment.

• API certified product with traceable part no
• Load capacity from 200ton to 500ton
• Quality assured with national best quality
• Short on deliver time

Model CD side door elevators with square shoulders are suitable for handling tunings, casings, drill pipes, and drill collars in oil drilling, natural gas drilling, and well construction. The products shall be designed and supplied according to API Spec 8A/8C Specification for drilling and production hoisting equipment.

• API certified products, national best quality
• Load capacity fro/m 100ton to 750ton
• Easy to operation while well drilling
• 100% NDT test for critical parts on the elevator

Casing Slips are specially developed to handle casing pipes during well drilling. There are Casing Slips Type CMS, and Casing Slips Type UC-. Casing Slips Type CMS can handle casing pipes from 4-1/2 in ( 114.3 mm) to 30 in (762 mm) O.D.Casing Slips Type UC-3 are multi-segments slips with 3 in/ft on the diameter taper slips (except size 8-5/8 in). Every segment of one slip is forced equally while working. Thus the casings could keep a better shape. They should work together with spiders and insert bowls with the same taper.

• With large handling size range.
• 100 % customer satisfaction for Quality and Reliability.
• After machining all slipsundergo 100% inspection.
• Manufactured according to API 7K standard.

CDZ drilling pipe elevator is mainly used in the holding and hoisting of drilling pipe with 18-degree taper and tools in oil and natural gas drilling, and workover. drill pipe elevators are forged from high-quality alloy steel, heat-treated, and NDT tested. The rated loads range from 150t (1350kN) to 500t (4500kN), and cover pipe sizes from 2.3/8″ to 5.1/2″ O.D

• With large handling size range.
• 100 % customer satisfaction for Quality and Reliability.
• After machining all slipsundergo 100% inspection.
• Manufactured according to API 7K standard.

DDZ series elevators are center latch elevators with 18-degree taper shoulder, applied in handling the drill pipe and drilling tools, etc. The load ranges from 100 tons to 750 tons and the size ranges from 2-3/8 to 6-5/8. The products shall be designed and manufactured according to the requirements in API Spec 8A/8C. Specification for drilling and production hoisting equipment. DDZ series elevators are center latch elevators with 18-degree taper shoulder, applied in handling the drill pipe and drilling tools, etc. The load ranges from 100 tons to 750 tons and the size ranges from 2-3/8 to 6-5/8.

1. Centralizer type elevator easy to operation.
2. 100% NDT test, hydraulic test, Load capacity test according to API 8C
3. Wear limit form provided for spare parts.
4. Load capacity from 100-750ton
5. Short on deliver time

DDZ series elevators are center latch elevators with 18-degree taper shoulder, applied in handling the drill pipe and drilling tools, etc. The load ranges from 100 tons to 750 tons and the size ranges from 2-3/8 to 6-5/8. The products shall be designed and manufactured according to the requirements in API Spec 8A/8C. Specification for drilling and production hoisting equipment.

• Centralizer type elevator easy to operation.
• 100% NDT test, hydraulic test, Load capacity test according to API 8C
• Wear limit form provided for spare parts.
• Load capacity from 100-750ton
• Short on deliver time

The hydraulic elevator can be devised into a center latch elevator and a side door elevator. By changing the bushing, it can handle drilling pipe, drill collar, casing, and tubing and uses the hydraulic control system, which makes the operation more convenient, effectively reduces the workers’ labor intensity, and improves the work efficiency; it can also realize remote control and make the use safer and more reliable. The products shall be designed and manufactured according to the requirements in API Spec 8C Specification for Drilling and Production Hoisting Equipment.

• Multi-segments design make it possible to handle different size drill collars by adjusting the quantity of inserts or slip body.
• 100 % customer satisfaction for Quality and Reliability.
• After machining all slipsundergo 100% inspection.

Drill Collar Slips are specially developed to handle drill collars during well drilling.There are Drill Collar Slips Type DCS, Drill Collar Slips Type A, and Drill Collar Slips Type WT.Drill Collar Slips Type DCS include DCS-S, DCS-R, and DCS-L types. They can handle drill collars from 3 in (76.2 mm) to 14 in (355.6 mm) O.D. The handling size can be adjusted by changing the quantity of inserts or slip bodies. Drill Collar Slips Type A are multi-segments slips. They can accommodate the changes in outer diameter after abrasion of the drill collar. And they feature light weight, large handling scale, and reliable quality.

• Multi-segments design make it possible to handle different size drill collars by adjusting the quantity of inserts or slip body.
• 100 % customer satisfaction for Quality and Reliability.
• After machining all slipsundergo 100% inspection.
• Different types for clients’
• With large handling size range and light weight.

The drill pipe power tong is an ideal oil drilling wellhead tool, widely used in marine, land drilling, and workover operations. ZQ series of hydraulic power drill pipe tongs are perfect handling tools for oil and gas drilling, used for making up and breaking out drill pipes and drill collars, The design and manufacturing standards have complied with API 7K.  Be able to make up & breakout pipe size from 2-3/8’’ to 8’’, 65-203mmhydraulic lifting equipmentavailable

• Performs safety, labor-saving and high-efficiency
• Industrial standard SY/5074 and API Spec 7K Specification for Drilling Equipment.
• Automatic Door Open / Close
• Make-up / Break-out Drill Collars & Bottom Hole Assemblies

The drill pipe slip is a kind of handling tool specially used to handle drill pipe during the oil well drilling operations for the exploration of petroleum and natural gas. It is an essential tool for coupling and uncoupling.There are SD types, B Types, and DU types, especially for drill pipe slips.Type SD Drill Pipe Slips cab handle drill pipes from 2 3/8 to 7 in (60.3 to 177.8mm).According to gripping length, SD slips are classified as Type Short (SDS) for shallow hole drilling, Medium (SDML) for medium depth drilling, and Extra Long (SDXL) for deep drilling.

• Suitable for shallow hole drilling, medium depth drilling and deep drilling.
• 100% customer satisfaction for Quality and Reliability.
• After machining all slipsundergo 100% inspection.
• Different types for clients’choice for different depth well and different size drill pipe.

Elevators links are suitable for hanging pipes in the operation of well drilling or repairing. According to the structures, they have two forms: Type DH & Type SH. The weldless links are forged with high-quality alloy steel. They are designed and manufactured according to API Spec 8A/8C.API 8C certified product.

• 2.Load capacity 75 up to 450 tons.
• 3.Maximum length 1.5M to 3.6M
• 4.Customized links available according to customer need.
• 5.Short on deliver time

The lifting cap is one special tool for the lifting of drilling tools in petroleum, natural gas, drilling engineering, and geographical exploration, also called a lifting bail. We can provide the lifting cap or lifting bail in integral type or circular type.API certified product with national best qualityForging type products used for lifting pipes collars, with regular thread connection

• Customized products available
• Customized links available according to customer need.
• 5.Short on deliver time
• Warranty 6month after sale